What it means
The controller has deliberately shorted its solar input internally to stop the battery being overcharged.
What you can check yourself
- Update the firmware in VictronConnect first. Victron lists this as the first step.
- Check the battery voltage setting (12V/24V) is correct.
- Check no other charger is pushing the battery voltage too high.
- Follow the recovery procedure in Victron's error-code guide for your exact number, as it differs between codes.
Likely causes
- Wrong battery voltage setting
- Another charging source raising the battery voltage
- Older firmware
When to call a pro
If it doesn't clear after a firmware update and the settings check, contact your Victron dealer or an auto electrician.
Good to know about Victron SmartSolar / BlueSolar MPPT controllers
- Codes show in the VictronConnect app and on the controller's display if it has one.
- Many errors clear themselves once the condition goes away. A firmware update fixes a surprising number.
Understand the part
Other Victron codes
Err 1Battery temperature too highErr 2Battery voltage too highErr 17Controller overheated despite reduced output currentErr 18Controller over-currentErr 20Maximum bulk time exceededErr 21Current sensor issueErr 26Terminal overheatedErr 28Power stage issueErr 33PV over-voltageErr 34PV over-currentErr 67BMS connection lostErr 119Settings data lost
Checked against: Victron Energy documentation. Last reviewed October 2026. General guidance only, not a diagnosis.
