What it means
The controller has spotted that your leisure battery is too hot, so it has stopped charging to protect it. It clears itself once the battery cools down.
What you can check yourself
- Leave the controller alone; it will restart charging by itself once the battery cools.
- Check the battery compartment isn't sealed up or baking in direct sun, and that vents aren't blocked.
- Feel the battery case carefully. If it is very hot, swollen or smells, stop all charging and keep away from it.
- If you have a temperature sensor (for example a Smart Battery Sense), check it is actually on the battery and not near a heater or engine bay.
Likely causes
- Hot weather or a poorly ventilated battery locker
- Battery being heavily charged or discharged
- Temperature sensor placed somewhere warm
- A failing battery
When to call a pro
If the battery is swollen, hissing or keeps overheating in normal weather, stop using it and get an auto electrician or habitation engineer to test it.
Good to know about Victron SmartSolar / BlueSolar MPPT controllers
- Codes show in the VictronConnect app and on the controller's display if it has one.
- Many errors clear themselves once the condition goes away. A firmware update fixes a surprising number.
Understand the part
Other Victron codes
Err 2Battery voltage too highErr 17Controller overheated despite reduced output currentErr 18Controller over-currentErr 20Maximum bulk time exceededErr 21Current sensor issueErr 26Terminal overheatedErr 28Power stage issueErr 33PV over-voltageErr 34PV over-currentErr 38 / Err 39PV input shutdownErr 67BMS connection lostErr 119Settings data lost
Checked against: Victron Energy documentation. Last reviewed October 2026. General guidance only, not a diagnosis.
