What it means
The controller's own current measurement has gone out of range. This one doesn't clear itself.
What you can check yourself
- Disconnect the solar panels and then the battery from the controller.
- Reconnect everything securely: battery first, then panels.
- Check the battery negative goes through the controller and isn't bypassing it (for example, a negative wired straight to the panel side).
- See whether the error comes back.
Likely causes
- Loose or poorly made connections
- Battery negative wired so it bypasses the controller
- An internal fault in the controller
When to call a pro
If it comes back after reconnecting, contact your Victron dealer or an auto electrician, as the unit may need replacing.
Good to know about Victron SmartSolar / BlueSolar MPPT controllers
- Codes show in the VictronConnect app and on the controller's display if it has one.
- Many errors clear themselves once the condition goes away. A firmware update fixes a surprising number.
Understand the part
Other Victron codes
Err 1Battery temperature too highErr 2Battery voltage too highErr 17Controller overheated despite reduced output currentErr 18Controller over-currentErr 20Maximum bulk time exceededErr 26Terminal overheatedErr 28Power stage issueErr 33PV over-voltageErr 34PV over-currentErr 38 / Err 39PV input shutdownErr 67BMS connection lostErr 119Settings data lost
Checked against: Victron Energy documentation. Last reviewed October 2026. General guidance only, not a diagnosis.
