What it means
The current from the solar panels has gone over the controller's rated limit.
What you can check yourself
- Turn the controller off by disconnecting the panels and battery.
- Wait 3 minutes.
- Reconnect and power it back up.
- Check whether the error returns.
Likely causes
- An internal controller fault
- A panel array that is too large for the controller
When to call a pro
If it keeps returning, Victron says the controller is likely faulty, so speak to your dealer or an auto electrician.
Good to know about Victron SmartSolar / BlueSolar MPPT controllers
- Codes show in the VictronConnect app and on the controller's display if it has one.
- Many errors clear themselves once the condition goes away. A firmware update fixes a surprising number.
Understand the part
Other Victron codes
Err 1Battery temperature too highErr 2Battery voltage too highErr 17Controller overheated despite reduced output currentErr 18Controller over-currentErr 20Maximum bulk time exceededErr 21Current sensor issueErr 26Terminal overheatedErr 28Power stage issueErr 33PV over-voltageErr 38 / Err 39PV input shutdownErr 67BMS connection lostErr 119Settings data lost
Checked against: Victron Energy documentation. Last reviewed October 2026. General guidance only, not a diagnosis.
