Stop using it until it's sorted. Restarting over and over can make things worse — and with heaters, a blocked flue or exhaust leak can let carbon monoxide into the van. Make sure your CO alarm works.
What it means
Part of the controller's internal power electronics has a problem. It doesn't clear itself, and if it persists Victron says the unit needs replacing.
What you can check yourself
- Disconnect the panels and battery from the controller.
- Wait a few minutes, then reconnect everything securely.
- If the error returns, stop relying on the controller for charging.
Likely causes
- An internal hardware fault in the controller
- Occasionally poor connections
When to call a pro
If it persists after reconnecting, contact your Victron dealer or an auto electrician about a replacement.
Good to know about Victron SmartSolar / BlueSolar MPPT controllers
- Codes show in the VictronConnect app and on the controller's display if it has one.
- Many errors clear themselves once the condition goes away. A firmware update fixes a surprising number.
Understand the part
Other Victron codes
Err 1Battery temperature too highErr 2Battery voltage too highErr 17Controller overheated despite reduced output currentErr 18Controller over-currentErr 20Maximum bulk time exceededErr 21Current sensor issueErr 26Terminal overheatedErr 33PV over-voltageErr 34PV over-currentErr 38 / Err 39PV input shutdownErr 67BMS connection lostErr 119Settings data lost
Checked against: Victron Energy documentation. Last reviewed October 2026. General guidance only, not a diagnosis.
