What it means
The controller has got too hot even after cutting back how much it charges. It resets itself once it cools down.
What you can check yourself
- Check the air around the controller. It needs space above and below, not a cupboard stuffed with bedding.
- Make sure the heatsink fins aren't covered or clogged with dust.
- Check whether it's in a hot spot, such as near a heater, an oven or a sun-baked locker.
- Wait for it to cool and check it restarts.
Likely causes
- Poor ventilation or a cramped mounting space
- High surrounding temperature
- Heatsink blocked or dusty
When to call a pro
If it overheats in a well-ventilated, cool spot, get an auto electrician or Victron dealer to check whether the controller is the right size for your panels.
Good to know about Victron SmartSolar / BlueSolar MPPT controllers
- Codes show in the VictronConnect app and on the controller's display if it has one.
- Many errors clear themselves once the condition goes away. A firmware update fixes a surprising number.
Understand the part
Other Victron codes
Err 1Battery temperature too highErr 2Battery voltage too highErr 18Controller over-currentErr 20Maximum bulk time exceededErr 21Current sensor issueErr 26Terminal overheatedErr 28Power stage issueErr 33PV over-voltageErr 34PV over-currentErr 38 / Err 39PV input shutdownErr 67BMS connection lostErr 119Settings data lost
Checked against: Victron Energy documentation. Last reviewed October 2026. General guidance only, not a diagnosis.
