← All fault codesEberspächer · Heating
050

Locked out — too many failed starts

Airtronic (S2 / D2 / D4) diesel heater

Stop and sort it
Stop using it until it's sorted. Restarting over and over can make things worse — and with heaters, a blocked flue or exhaust leak can let carbon monoxide into the van. Make sure your CO alarm works.

What it means

The heater has failed to start too many times and has locked itself out. This stops it repeatedly pumping fuel it can't burn. It won't run again until the fault memory is cleared.

What you can check yourself

Likely causes

When to call a pro

If you can't clear the fault memory yourself, or it locks again, book in with an Eberspächer dealer.

Good to know about Eberspächer Airtronic diesel heaters

Understand the part

Other Eberspächer codes

Checked against: Eberspächer troubleshooting manual (via UK distributor). Last reviewed October 2026. General guidance only, not a diagnosis.

The Autonomy Family