What it means
The fridge is seeing more than 16V on its 12V supply, which is too high.
What you can check yourself
- Switch the fridge to gas or mains.
- Check whether a charger (solar, B2B, alternator) is misconfigured, for example set to 24V or to the wrong battery type.
- Check the voltage on your battery monitor if you have one.
Likely causes
- Misconfigured or faulty charger
- A charging system fault
When to call a pro
Get an auto electrician to check the charging system, as over 16V can damage other kit too.
Good to know about Dometic absorption (3-way) fridges
- Newer RMD 10.5 fridges show W (warning) and E (error) codes. Older RM 8 fridges with AES or MES control flash a red failure light alongside the mode that has a problem.
- Absorption fridges need to be roughly level to cool properly. If it's not cooling, check that first.
Understand the part
Other Dometic codes
E07 / E08 / E09No cooling in gas / mains / 12V modeE14Low battery in stand-alone gas modeE50Gas lockout after 3 ignition attemptsFailure LED + 12 flashingNo 12V or voltage under 10.5VFailure LED + 230 flashingNo mains or voltage under 195VFailure LED + GAS flashingGas ignition failedFailure LED + temperature LEDs flashingTemperature sensor (NTC) faultTank StopGas mode blocked for 15 minutesW01Temperature sensor faultW05No mains power or mains too lowW06No 12V powerW10Door open more than 2 minutes
Checked against: Dometic manual. Last reviewed October 2026. General guidance only, not a diagnosis.
