What it means
The fridge's temperature sensor (thermistor) has failed or come loose. The fridge keeps running in an emergency backup mode, but it won't control temperature as precisely.
What you can check yourself
- Keep using the fridge, but check food temperatures with a fridge thermometer.
- Check inside the fridge whether the sensor on the cooling fins has come loose.
- Switch off and on to see whether it clears.
Likely causes
- Sensor dislodged or disconnected
- Damaged sensor wiring
- Faulty sensor
When to call a pro
Book a habitation engineer to replace the sensor. It's a routine part.
Good to know about Thetford N3000 / N4000 fridges
- N3000 and N4000 fridges share the same error numbers. Older N3000 panels show the code as a pattern of lights rather than a number.
- On the N4000, hold all three buttons together until the flashing stops to see the code.
Understand the part
Other Thetford codes
All lights blinkingSeveral errors at onceError 3Gas lockout: flame didn't light within 30 secondsError 412V heater not workingError 612V supply out of rangeError 7D+ (engine running) signal missingError 8230V heater faultError 10230V supply out of rangeError 11No energy source availableError 12Display and power board lost communication
Checked against: Thetford manual. Last reviewed October 2026. General guidance only, not a diagnosis.
