What it means
The compressor's electronic control unit has got too hot, either because the fridge has been working too hard or because it's very hot around it, so it has shut down to protect itself.
What you can check yourself
- Switch off and let it cool.
- Improve airflow around the compressor area: clear vents and don't pack kit against them.
- On hot days, open the van up or add ventilation where you can.
- Switch back on once cool.
Likely causes
- High ambient temperature (e.g. van parked in sun)
- Blocked or inadequate ventilation
- Heavy cooling load
When to call a pro
If it overheats in mild conditions with good ventilation, have a refrigeration engineer check the fan and electronic unit.
Good to know about 12V compressor fridges (Secop / Danfoss BD35F & BD50F)
- Most 12V compressor fridges in campervans (many Dometic, Vitrifrigo and Isotherm models) use a Secop BD35F or BD50F compressor. If a diagnostic LED is fitted, it flashes these codes. The sequence repeats every four seconds.
- Fridges with their own digital display may show the manufacturer's own codes instead.
Understand the part
Other Secop (formerly Danfoss) codes
1 flashBattery protection cut-out2 flashesToo many starts or fan over-current3 flashesCompressor motor start error4 flashesMinimum motor speed error6 flashesThermostat sensor fault
Checked against: Secop electronic unit instructions. Last reviewed October 2026. General guidance only, not a diagnosis.
