What it means
The cooling system is working so hard that the compressor can't hold its minimum speed (about 1,850 rpm, revolutions per minute).
What you can check yourself
- Improve ventilation around the fridge: clear the vents and make sure warm air can escape.
- Avoid loading lots of warm food and drink at once.
- Keep the door shut while it pulls down to temperature.
- Check the condenser fan is running.
Likely causes
- Poor ventilation, especially in hot weather
- Overloading with warm contents
- Fan not running
When to call a pro
If it keeps happening in normal conditions, a refrigeration engineer should check the system.
Good to know about 12V compressor fridges (Secop / Danfoss BD35F & BD50F)
- Most 12V compressor fridges in campervans (many Dometic, Vitrifrigo and Isotherm models) use a Secop BD35F or BD50F compressor. If a diagnostic LED is fitted, it flashes these codes. The sequence repeats every four seconds.
- Fridges with their own digital display may show the manufacturer's own codes instead.
Understand the part
Other Secop (formerly Danfoss) codes
1 flashBattery protection cut-out2 flashesToo many starts or fan over-current3 flashesCompressor motor start error5 flashesElectronic unit overheated6 flashesThermostat sensor fault
Checked against: Secop electronic unit instructions. Last reviewed October 2026. General guidance only, not a diagnosis.
