What it means
Typically means the heater has failed to start several times in a row, usually because of another underlying problem such as fuel, voltage or the glow plug. Codes vary by model and seller, so check your own heater's manual.
What you can check yourself
- Don't keep restarting it, because unburnt fuel can build up.
- Work through fuel supply first: tank level, air in the line, filter.
- Check battery voltage and the glow plug connection.
- Check the exhaust and intake are clear before trying once more.
Likely causes
- Fuel supply problem
- Low voltage
- Failing glow plug
- Blocked exhaust or intake
When to call a pro
If you can't find the cause, get it looked at, because repeated failed starts can leave fuel and carbon in the burner.
Good to know about Budget 'Chinese' diesel heaters (LCD controller)
- These codes vary between models and sellers. What's here is the most common meaning across the popular LCD controllers. If your manual says something different, trust the manual.
- These heaters are often self-fitted. A badly routed exhaust can leak carbon monoxide into the van, so always run a working CO alarm.
Understand the part
Other Generic (Chinese) codes
E-01Voltage too lowE-02Voltage too highE-03Glow plug faultE-04Fuel pump faultE-05OverheatingE-06Fan motor faultE-07Controller communication faultE-08Flame out / failed to start
Checked against: Diesel Heaters NI troubleshooting guide — codes for this product vary between models, so check your own manual too. Last reviewed October 2026. General guidance only, not a diagnosis.
