What it means
Generally means a problem with the fuel pump or its wiring. Codes vary by model and seller, so check your own heater's manual.
What you can check yourself
- Check the fuel pump plug is connected and not corroded.
- Listen for the pump ticking at start-up. No tick suggests a wiring or pump fault.
- Check the fuel line for kinks, and that there's fuel in the tank.
Likely causes
- Disconnected or corroded pump plug
- Damaged pump wiring
- Failed fuel pump
When to call a pro
If the wiring is fine and the pump won't tick, a specialist can test or replace it.
Good to know about Budget 'Chinese' diesel heaters (LCD controller)
- These codes vary between models and sellers. What's here is the most common meaning across the popular LCD controllers. If your manual says something different, trust the manual.
- These heaters are often self-fitted. A badly routed exhaust can leak carbon monoxide into the van, so always run a working CO alarm.
Understand the part
Other Generic (Chinese) codes
E-01Voltage too lowE-02Voltage too highE-03Glow plug faultE-05OverheatingE-06Fan motor faultE-07Controller communication faultE-08Flame out / failed to startE-10Ignition failure after repeated attempts
Checked against: Diesel Heaters NI troubleshooting guide — codes for this product vary between models, so check your own manual too. Last reviewed October 2026. General guidance only, not a diagnosis.
