Stop using it until it's sorted. Restarting over and over can make things worse — and with heaters, a blocked flue or exhaust leak can let carbon monoxide into the van. Make sure your CO alarm works.
What it means
On most of these controllers E-05 means the heater has overheated, usually from blocked airflow. Codes vary by model and seller, so check your own heater's manual.
What you can check yourself
- Stop using the heater and let it cool fully.
- Clear anything blocking the air intake or hot air outlet.
- Check ducting isn't crushed, kinked or disconnected.
- Check the fan spins freely before restarting.
Likely causes
- Blocked air intake or outlet
- Crushed or kinked ducting
- Fan problems
When to call a pro
If it overheats with clear airflow, have a specialist check the sensors and fan.
Good to know about Budget 'Chinese' diesel heaters (LCD controller)
- These codes vary between models and sellers. What's here is the most common meaning across the popular LCD controllers. If your manual says something different, trust the manual.
- These heaters are often self-fitted. A badly routed exhaust can leak carbon monoxide into the van, so always run a working CO alarm.
Understand the part
Other Generic (Chinese) codes
E-01Voltage too lowE-02Voltage too highE-03Glow plug faultE-04Fuel pump faultE-06Fan motor faultE-07Controller communication faultE-08Flame out / failed to startE-10Ignition failure after repeated attempts
Checked against: Diesel Heaters NI troubleshooting guide — codes for this product vary between models, so check your own manual too. Last reviewed October 2026. General guidance only, not a diagnosis.
