What it means
Generally means the flame went out or never took hold, often from low fuel or air in the fuel line. Codes vary by model and seller, so check your own heater's manual.
What you can check yourself
- Check fuel level and top up.
- Look for air bubbles, kinks or leaks in the fuel line and check the fuel filter.
- Check the exhaust and air intake are clear.
- Check the exhaust run for holes or loose joints. A leak can let carbon monoxide (CO), an invisible deadly gas, into the van. Always run a working CO alarm.
Likely causes
- Low fuel or air in the line
- Blocked fuel filter
- Blocked exhaust or intake
- Low voltage
When to call a pro
If it keeps flaming out with good fuel and clear pipes, get the heater serviced, as carbon build-up is common.
Good to know about Budget 'Chinese' diesel heaters (LCD controller)
- These codes vary between models and sellers. What's here is the most common meaning across the popular LCD controllers. If your manual says something different, trust the manual.
- These heaters are often self-fitted. A badly routed exhaust can leak carbon monoxide into the van, so always run a working CO alarm.
Understand the part
Other Generic (Chinese) codes
E-01Voltage too lowE-02Voltage too highE-03Glow plug faultE-04Fuel pump faultE-05OverheatingE-06Fan motor faultE-07Controller communication faultE-10Ignition failure after repeated attempts
Checked against: Diesel Heaters NI troubleshooting guide — codes for this product vary between models, so check your own manual too. Last reviewed October 2026. General guidance only, not a diagnosis.
