Stop using it until it's sorted. Restarting over and over can make things worse — and with heaters, a blocked flue or exhaust leak can let carbon monoxide into the van. Make sure your CO alarm works.
What it means
The charger's power terminals are overheating, usually because of a loose bolt or unsuitable cable.
What you can check yourself
- Turn the engine off and isolate the batteries before touching any wiring.
- Check the terminal bolts are tight.
- Check the cable size and type, including ferrules on fine-stranded cable.
- Look for scorching or melted insulation. If there is any, don't reconnect.
- The error resets once the terminals cool.
Likely causes
- Loose terminal bolts
- Wrong cable type or size
- Damaged terminals
When to call a pro
If there's any heat damage, get an auto electrician to fix it before driving with it connected.
Good to know about Victron Orion-Tr Smart B2B chargers
- Codes show in the VictronConnect app.
Understand the part
Other Victron codes
Checked against: Victron Energy documentation. Last reviewed October 2026. General guidance only, not a diagnosis.
