What it means
The fill lights never come on. The float inside the cassette uses a magnet to trigger a sensor, and one of those parts isn't working.
What you can check yourself
- Check the cassette is fully pushed in.
- Check the float inside the cassette moves freely and isn't stuck with toilet paper.
- Check the toilet has 12V power, for example whether the flush works.
Likely causes
- Stuck or misplaced float
- Cassette not seated
- Faulty reed switch or loose wiring
When to call a pro
If the float and cassette are fine, a habitation engineer can replace the reed switch or control panel.
Good to know about Thetford cassette toilets
- The fill indicator works off a float with a magnet inside the cassette. Most 'faults' are a float stuck with paper or a cassette not pushed fully home.
Understand the part
Other Thetford codes
Lower / middle / top LEDThree-level fill indicatorNo flushElectric flush not workingRed light flashingCassette missing or not seated properlyRed light onCassette nearly full
Checked against: Thetford manual. Last reviewed October 2026. General guidance only, not a diagnosis.
