What it means
A flashing red light means the toilet can't detect the waste cassette: it's either not there or not pushed fully home.
What you can check yourself
- Open the outside service door and check the cassette is in place.
- Pull it out and push it back in firmly until it locks.
- Make sure the blade is closed before reinserting, and don't force it.
Likely causes
- Cassette not fully inserted
- Cassette removed
When to call a pro
If it keeps flashing with the cassette properly seated, a habitation engineer can check the sensor (reed switch) and wiring.
Good to know about Thetford cassette toilets
- The fill indicator works off a float with a magnet inside the cassette. Most 'faults' are a float stuck with paper or a cassette not pushed fully home.
Understand the part
Other Thetford codes
Lower / middle / top LEDThree-level fill indicatorNo flushElectric flush not workingNo level lightLevel indicator not workingRed light onCassette nearly full
Checked against: Thetford manual. Last reviewed October 2026. General guidance only, not a diagnosis.
